- Περιγραφή
-
Λεπτομέρειες
- Weight 500gr
- Diameter 1.75 mm
- Tolerance +/- 0.05mm (Due to the elastic properties of the material, is not a problem during when printing)
- Non-hazardous substance according to the GHS classification
- High adhesion with 3d printed bed
- Do not need heatbed
If your hotend is not optimized with a PTFE liner inside. Please follow these recommendations.
- Print speed 20mm/s
- Print temperature (240 °C)
- None retractions or low distance (1mm retraction distance and 30mm/s speed)
- Increase the extruder flow if your plastic melt flow is not constant.(105-115%)
- Decrease the pressure of the idler bearing of your extruder in order to avoid filament clogging between the extruder gear and bearing.
- Επιπρόσθετες πληροφορίες
-
Επιπρόσθετες πληροφορίες
Υλικό TPE Διάμετρος 1.75 mm Χρώμα Γκρι Pantone Όχι Μήκος Όχι Μάζα 500g Όγκος Όχι Καρούλι Ναι Θερμοκρασία ακροφυσίου 225-260°C Θερμοκρασία επιφάνειας Όχι Ταχύτητα εκτύπωσης 20 - 110 mm/s - Αξιολογήσεις
-
- Συννημένα αρχεία
-